
Simple and Everyday-Friendly “Jigusa” and “Tsuna”
This cup features a simple engraved pattern.
It is adorned with the auspicious “Jigusa” and “Tsuna” patterns.
Its just-right size makes it suitable for use as a rocks glass or candle holder.

The Jigusa pattern, featuring a small bamboo-like plant.
This pattern has long been loved since the Edo period as a lucky charm for growth and prosperity, inspired by the plant’s straight, upward growth.
A beautiful curved mesh pattern.
It is a symbol of good luck, representing the idea that “a net can hold happiness” and “a net is always tied and never comes undone.”
A chic black Jigusa pattern.
The Jigusa pattern is also available in black.

Available in two sizes. The one in front is small, and the one in back is large.
A simple cup that blends into any setting. Its auspicious pattern also makes it perfect as a gift.
[About the Product]
Product Name: Engraved Cup (Small)
Material: Porcelain (White Porcelain / Black Clay)
Size: Height 6.9 cm, Diameter 8.5 cm
Finish: Glossy
Manufacturer: M.M.Yoshihashi / Designed by YACHT
【Precautions】
・There may be slight variations in size and color.
・ Colors may appear different depending on your computer settings.
・This product may break if subjected to strong impact. Please handle with care, as it may cause cuts or other injuries.
・Do not drag the product across tables or other surfaces, as this may cause scratches.
・After use, wash immediately and dry thoroughly before storing. Failure to do so may cause mold or other issues.
・Please avoid using this product in the dishwasher, as it may cause damage.
・Cleaning overglaze products with steel wool or abrasive cleaners may cause the decoration to peel or become scratched.
[Introducing Seto no Tsukurite]
Unique creations that make full use of traditional mold-making techniques: M.M.Yoshihashi

“M.M.Yoshihashi” began as a “kata-ya” (mold maker) in the Shinano district of Seto City in 1959. A kata-ya is a specialist in making the molds used for mass-producing pottery.
Today, Kenichi Yoshihashi, the third generation to carry on the family business, makes full use of the mold-making techniques cultivated over generations, commissioning potteries to produce highly original products.
What Does a Kata-ya Do?

A kata-ya’s work begins with drawing a design.

Based on the design, plaster is carved to create the original model. Because shrinkage and deformation vary depending on the clay, forming, firing, and kiln, extensive experience and knowledge are required.※Pottery shrinks when fired in a kiln.

The one in front is called the “master model,” and plaster is poured into the original model to create the mold.
The one in back is called a “case,” and it is used to make many molds. It is a mold for mass-producing molds.

Once these are ready, the “production mold” used by the pottery is born. This is the mold used to mass-produce pottery. To mass-produce, several molds must be in operation at the same time, so the required number of these are made.
This “production mold” is made by adjusting the type of plaster and the moisture content to suit the forming method and the characteristics of the pottery studio.
The original model and production mold for the best-selling Trace Face Knit Wear.
The origin of M.M.Yoshihashi's unique creations
A goldfish aroma stone and TeruTeruVASE.
At M.M.Yoshihashi, in addition to original designs by Representative Kenichi Yoshihashi, there are many collaborations with designers, and challenging, unique items are being created one after another.
Despite this, when Yoshihashi was in high school, he reportedly decided, “I will never take over the family business!” To get as far away from home as possible, he enrolled in a national university in the Chugoku region. However, he realized that this was not where the young Yoshihashi belonged. Without telling his parents, he dropped out of university and enrolled in a fashion vocational school in the metropolis of Tokyo.

“At the vocational school, I studied hard in “pattern making,” which involves creating patterns for clothing. I found it incredibly enjoyable to work at the very foundation of clothing, the most basic part of the process. But when I went home and looked at my parents’ work again, I realized they were doing the same thing.”
Yoshihashi says this with a smile. Although clothing and finished pottery are different, he realized that drawing designs and creating three-dimensional objects was the same work, and that is why he decided to take over the family business.
After returning at age 28, he has been making his own molds and consulting with pottery studios to create products, asking himself, “If I can make my own molds, why not start my own brand?”
Many of the items created by Yoshihashi are exciting and add joy to everyday life.
At the same time, recognizing that the number of “kata-ya” in the industry is steadily declining, he has opened “Kata no Gakkou” (Mold School) and holds workshops on plaster molds for artists and pottery professionals.He is also working to promote the craft more widely, hoping that even a little interest might inspire someone to become a craftsman.
The future of the “kata-ya” that supports pottery production areas.
We hope you will continue to follow their journey!
MORE FROM THE MAKER
M.M.Yoshihashi
-
M.M.Yoshihashi | TETANPO (Little Bird)
Regular price ¥4,400Regular priceUnit price perSale price ¥4,400 -
M.M.Yoshihashi | Trace Face cup Knit wear
Regular price ¥3,080Regular priceUnit price perSale price ¥3,080 -
M.M.Yoshihashi | Trace Face cup Rattan Basket
Regular price ¥3,080Regular priceUnit price perSale price ¥3,080 -
M.M.Yoshihashi | Seigaiha Triangular Plate (Slim)
Regular price ¥3,630Regular priceUnit price perSale price ¥3,630



